Zinc-Mediated Facile and Efficient Chemoselective S-Alkylation of 5-Aryl-1,3,4-oxadiazole-2-thiols in the Absence of Base

Zinc-mediated facile and efficient chemoselective S-alkylation of 5-aryl 1,3,4-oxadiazole-2-thiols in the presence of a catalytic amount of tetra butyl ammonium iodide was described. The reaction was performed under neutral conditions. The chemoselectivity of the alkylation was confirmed by NMR spectroscopy and x-ray crystallography.     

Rapid Access for the Synthesis of 1‐N‐Methyl‐spiro[2.3′]oxindole‐spiro[3.7″] (3″‐Aryl)‐5″‐methyl‐3″,3a″,4″,5″,6″,7″‐hexahydro‐2H‐pyrazolo[4,3‐c]pyridine‐4‐aryl‐pyrrolidines Through Sequential 1,3‐Dipolar Cycloaddition and Annulation

The 1,3‐dipolar cycloaddition of an azomethine ylide, generated from isatin and sarcosine by a decarboxylative route with various p‐substituted 3,5 bis(aryl methylidene)N‐methyl‐4‐piperidinones in refluxing methanol, proceeded regioselectively to give novel dispiroheterocycles. The product on subsequent annulation with hydrazine hydrate afforded 1‐N‐methyl‐spiro[2.3′]oxindole‐spiro[3.7″](3″‐aryl)‐5″‐methyl‐3″,3a″,4″,5″,6″,7″‐hexahydro‐2H‐pyrazolo[4,3‐c]pyridine‐4‐aryl‐pyrrolidines in good yield.     

Strategies for Enhancing the Production of Penicillin G Acylase from Bacillus badius: Influence of Phenyl Acetic Acid Dosage

Bacillus badius isolated from soil has been identified as potential producer of penicillin G acylase (PGA). In the present study, batch experiments performed at optimized inoculum size, temperature, pH, and agitation yielded a maximum PGA of 9.5 U/ml in shake flask. The experiments conducted in bioreactor with different oxygen flow rates revealed that 0.66 vvm oxygen flow rate could be sufficient for the maximum PGA activity of 12.7 U/ml. From a detailed investigation on the strategies of the addition of phenyl acetic acid (PAA) for increasing the production of PGA, it was found that the controlled addition of 10 ml of 0.1 % (w/v) PAA once in every 2 h from 6th hour of growth showed the maximum PGA activity of 32 U/ml. Thus, our studies for the first time showed that at concentration above 0.1 % (w/v) PAA, the PGA production decreased. This selective condition paves the way for less costly bioprocess for the production of PGA.     

BF3·OEt2-catalyzed synthesis of 1-(tetrahydropyran-3-yl)-1,3-dihydroisobenzofuran and trans-fused hexahydropyrano[3,2-c]chromene derivatives

A novel intramolecular Prins cyclization of (E)-5-(2-(hydroxymethyl)phenyl)pent-4-en-1-ol with aldehydes has been achieved using 10 mol % BF₃·Et₂O to produce 1-(tetrahydropyran-3-yl)-1,3-dihydroisobenzofuran derivatives in good to excellent yields with high selectivity. Similar type of coupling with salicylaldehydes provides the trans-fused hexahydropyrano[3,2-c]chromene derivatives in excellent yields.     

p-Tolyl isocyanate derivatization for analysis of CWC-related polar degradation products by mass spectrometry

Most of the precursors and/or degradation products related to the Chemical Weapons Convention (CWC) are polar. Identification of these molecules in environmental samples provides clues regarding the alleged usage and/or synthesis of the parent toxic chemicals. Such polar compounds need to be derivatized in order to analyze them by gas chromatography–mass spectrometry (GC–MS). In this study, we developed a new derivatizing reagent, para-tolyl isocyanate (PTI), for derivatization of polar CWC-related compounds. The PTI reagent selectively derivatizes the –OH and/or?SH functional groups with high efficiency, but does not react with carboxylic acid (?COOH) or phosphonic acid (?(O)P(OH)₂) groups. The PTI derivatives of dialkyl aminoethanols, dialkyl aminoethanol-N-oxides, and 3-quinuclidinol were successfully eluted through GC, and their electron ionization (EI) mass spectra were distinct and provided the structure information by which the isomeric compounds can be easily distinguished. We also calculated the GC-retention index values that can be used for further confirmation of the target compounds. All the studied PTI derivatives can be analyzed by EI-MS with direct insertion probe and/or by direct electrospray ionization mass spectrometry (ESI-MS) together with the MS–MS data; both sets of data provide full structure information. The PTI reagent was found to be better in some respects than the conventional bistrimethylsilyl trifluoroacetamide (BSTFA), a trimethyl silylating reagent. The PTI reagent is commercially available, and the PTI derivatives are highly stable for months and are not sensitive to moisture. The applicability of the PTI derivatization for trace-level determination of the target CWC-related polar compounds in environmental matrices and in human plasma samples is also evaluated.

Gravitational stability of suspensions of attractive colloidal particles

Colloidal suspensions are susceptible to gravitationally induced phase separation. This can be mitigated by the formation of a particle network caused by depletion attraction. The effectiveness of this network in supporting the buoyant weight of the suspension can be characterized by its compressional modulus. We measure the compressional modulus for emulsion networks induced by depletion attraction and present a model that quantitatively predicts their gravitational stability. We also determine the relationship between the strength of the depletion attraction and the magnitude of the compressional modulus.     

Synthesis and Structural Proof of a Potent 5-Lipoxygenase Inhibitor

Abstract  

5-Lipoxygenase inhibitor 3-O-acetyl-9,11-dehydro-β-boswellic acid was detected in the extract of Boswellia serrata gum resulting from unstable 11-hydroxy precursor. It was reported more potent than other Boswellic acids in its inhibition of 5-Lipoxygenase. Here, we report the method of conversion of 3-acetoxy-β-boswellic acid to 3-O-acetyl-9,11-dehydro-β-boswellic acid, and the crystal structure of later. This compound crystallizes in orthorhombic space group P2₁2₁2₁ with cell parameters of a = 12.726(1) ?, b = 16.597(1) ?, c = 27.332(2) ?, α = β = γ = 90°, V = 5772.7(5) ?³, D _c = 1.143 Mg/m³, and Z = 8. The X-ray structure investigation indicates that the rings A, B, D and E are exhibit chair and the ring C adopts a distorted half chair conformation. The conformational difference of the two structures in the arrangement is due to crystal packing of 3-O-acetyl-9,11-dehydro-β-boswellic acid. The molecular packing is stabilized by C–H···O and O–H···O types of hydrogen bonding interactions.     

Structural Conformation of a Novel Piperidine-4-One Derivative: 1-Acryloyl-3-Methyl-2,6-Dip-Tolylpiperidine-4-One

Abstract  

The novel 3-methyl-2,6-dip-toylpiperidine-4-one was acylated by 3-chloropropanoychloride and subjected for dehydrohalogenation. The synthesized compound was characterized by spectroscopic techniques and finally confirmed by X-ray diffraction studies. The molecule crystallizes in the monoclinic crystal class in the space group C ₂/c with cell parameters a = 18.538(2) ?, b = 9.9050(1) ?, c = 22.954(2) ?, β = 94.486(8)° and Z = 8. The piperidine ring adopts a twist boat conformation.     

Mass spring lattice modeling of the scanning laser source technique

The scanning laser source (SLS) technique is a promising new laser ultrasonic tool for the detection of small surface-breaking defects. The SLS approach is based on monitoring the changes in laser generated ultrasound as a laser source is scanned over a defect. Changes in amplitude and frequency content have been observed for ultrasound generated by the laser over uniform and defective areas. In this paper, the SLS technique is simulated numerically using the mass spring lattice model. Thermoelastic laser generation of ultrasound in an elastic material is modeled using a shear dipole distribution. The spatial and temporal energy distribution profiles of typical pulsed laser sources are used to model the laser source. The amplitude and spectral variations in the laser generated ultrasound as the SLS scans over a large aluminum block containing a small surface-breaking crack are observed. The experimentally observed SLS amplitude and spectral signatures are shown to be captured very well by the model. In addition, the possibility of utilizing the SLS technique to size surface-breaking cracks that are sub-wavelength in depth is explored.